New Peavey – born in the USA

New Peavey – born in the USA

Peavey is launching a brand new USA-made guitar at Summer Namm today, the HP2.
The HP2 has a carved top and offset, asymmetrical body design that Peavey says offers comfort, proper balance, and maximum playing ease. Maple was chosen for the top and basswood for the back; solid basswood construction is also available. Peavey says it selected these hardwoods not only for their natural beauty and weight characteristics, but also for their specific tonal qualities. Cream or black-edge binding accents the body.
The HP2 also boasts a select birdseye maple neck and fingerboard and the neck has dual graphite reinforcement bars and an easy-access, adjustable steel torsion rod provide additional strength, as does the bolt-on construction with contoured neck heel. The oil-finished fingerboard is cut from the same piece of wood as the single-piece neck, keeping the colour and grain patterns consistent. The stress-relieved lamination also adds increased stability. The HP2 has a 25 ½’’ scale length, 22 jumbo frets and 15’’ fingerboard radius. The 10-degree tilt-back headstock has a 3+3 tuning machine configuration featuring Schaller tuning machines with pearloid or cream buttons.
Pickups come in the form of two custom-wound Peavey humbuckers made using a two-step wax-dipping process that provides ultra-low noise operation and resistance to microphonic feedback. The pickups are mounted directly to the body, further reducing feedback at high volume levels and enhancing response. A Switchcraft three-way toggle switch allows selection of pickups in up, centre and down configurations. Players will also find either a Peavey/Floyd Rose licensed, double-locking tremolo assembly or tune-o-matic/stop tailpiece fixed-bridge to complete the guitar. Finishing off the guitar are two push-pull knobs for volume and tone, with the ability to split the pickups individually.

Info: www.peavey.com

The post New Peavey – born in the USA appeared first on Music Instrument News.

read more

Source: musicinstrumentnews.co.uk