Question: SR4HH neck screws
I’ve been spending quite a bit of time with my/new Stingray HH, fine tuning the set up. It’s been a bit of s tricky one this one, quite a few buzzes to iron out but it’s getting there. I shimmed the neck today and while I was removing the neck I was quite shocked at how little thread there is going into the neck.
The easiest thing to do would be to remove one from one of my other StingRays for comparison but thought I’d ask here first if that’s normal or is there some design differences that I’ve over looked with the H and HH body’s.
The double H doesn’t seem to resonate/ring as clearly (unplugged) as the single H.
Is this because of the extra body routings ?
It’s my first HH so any information welcome.
The easiest thing to do would be to remove one from one of my other StingRays for comparison but thought I’d ask here first if that’s normal or is there some design differences that I’ve over looked with the H and HH body’s.
The double H doesn’t seem to resonate/ring as clearly (unplugged) as the single H.
Is this because of the extra body routings ?
It’s my first HH so any information welcome.
Are the screws shorter for some reason or is the pocket deeper?
Cheers
Source: http://forums.ernieball.com
