using a Eventide Eclips with a G System question
Hey so I think I will go with the Eventide Eclips as a secondary effects unit.
Reading on the Eventide website I found that it is possible to run an Eclips but only that you have to be set to MIDI map.
https://www.eventideaudio.com/community … k-g-system
I have no problem going this route. Exept for one problem.
I have my Voodoo Lab GCX set on OMNI and I use cc: 80-87 to control the 8 loops which I’ve set to buttons.
My question is
Can I still use the Eclips in the format shown in the example, and also have midi controlled buttons controlling the Voodoo Labs GCX.
I would appreciate all the help and good advice.
Thanks
Source: http://forum.tcelectronic.com
