Introducing Muse Driver Andy Timmons Full Range Overdrive From Keeley Electronics
The MUSE DRIVER – Andy Timmons Full Range Overdrive is an overdrive workstation that allows you to orchestrate everything from a clean boost to a treble supercharger, a chimey tube-amp overdrive to a square-wave, germanium fuzz generator and more.
This pedal combines a three-control blues driver circuit with two switches for the voicing of Drive and Tone characteristics. Robert and Andy developed these switches to give players a broad range of drive tones. The Drive toggle engages two germanium diodes for a smoother, slightly compressed drive. Switch to Andy’s clipping style for a brighter and more articulate attack. Every part of the circuit has been optimized for tone and the demanding needs of a recording and touring artist such as Andy Timmons. Simply adding the MUSE DRIVER to your pedalboard will make your rig sound better. This professional grade overdrive can be switched between true-bypass and buffered bypass at any time.
• Overdrive Effects Pedal
• Classic blues driver circuit with decades of Keeley mod experience
• Germanium based overdrive crafted with Andy Timmons’ direction
• Combines JFET saturation, diode clipping, and op-amp clipping for a harmonically rich tone
• Provides slightly broken up/clean tones and amp-like overdrive
• 9 to 18 Volt operation for huge dynamic range and headroom
• Tone Switch o AT: cuts lows for clarity o RK: boosts low-end for power
• Drive Switch o AT: asymmetrical LED and silicon diode clipping o RK: dual germanium diodes – softer, smoother feel with almost fuzzy characteristics
• Selectable Buffered/True Bypass Switching – Change instantly and on-the-fly depending on your rig’s needs
• Made in Edmond, USA
• Powered by a regular 9-18V DC PSU (centre -, 2,1 mm, ~27 mA current draw)
Andy Timmons – Tone Switch
This drive pedal gives you two tone control circuits to choose from. When the Tone Switch is up and in the AT Position the tone control features Andy’s preferred voicing and low-end response. Each note in a chord is clear and articulate. If the Tone Switch is down and in the RK Position that features the legendary Phat Boost providing more low-end frequency response, perfect for pushing up vintage or single coil pickups. Full Range Overdrive – Germanium Toggle Switch The MUSE DRIVER circuit combines JFET saturation, diode clipping, and op-amp clipping in order to create its harmonically rich tone. Drive Switch UP for AT Clipping – this mode features asymmetrical LED and silicon diode clipping and is Andy’s Super AT Mod sound. Drive Switch Down for RK Clipping – now the circuit features two germanium diodes for clipping. This mode can sound a bit like a vintage fuzz pedal with a softer, smoother feel. MUSE DRIVER – Buffered Bypass or True Bypass The pedal features our industry leading buffer for noise-free switching. We have developed a buffer which not only makes your rig sound better, it gives you silent switching with no tone loss. Switch between true-bypass and buffered on the fly. Simply press and hold the foot switch for two seconds and the pedal will switch between true-bypass and buffered bypass! You decide what works best in your rig. Made In The USA We design, engineer, and manufacture the Keeley Electronics/Andy Timmons MUSE DRIVER in Oklahoma City. Everything about the MUSE DRIVER is geared towards the professional musician and their quest for an inspiring tone when performance demands it. From the meticulously built circuit boards to the newly fabricated aluminum enclosure; we make guitar effect pedals like finely crafted musical instruments.
A Note From Andy Timmons: ‘The MUSE DRIVER is the ultimate expression of the clean/slightly broken-up tone I’ve been going for over the last several years. Robert Keeley and his incredible team have once again knocked it out of the park! The AT/AT setting is exactly my Super AT Mod tone: just the right amount of breakup available at your dynamic command. Every note and nuance is clear as a bell. The crazy thing about this mode is that it also sounds great with the gain turned up, providing an incredibly cool Marshall-esque crunch tone. Having the original RK modded BD-2 circuit is sheer luxury as that’s the circuit that I fell in love with years ago! It still inspires me! The real hidden gem here is Robert’s new modification that utilizes germanium diodes instead of the original silicon for a new kind of clipping that works insanely well on its own OR as a boost for my lead tone. It has a lovely way of further taming the low-end that I really love. With the MUSE DRIVER and the Halo, I’m in Tone Heaven!’
Made In The USA
We design, engineer, and manufacture the Keeley Electronics/Andy Timmons MUSE DRIVER in Oklahoma City. Everything about the MUSE DRIVER is geared towards the professional musician and their quest for an inspiring tone when performance demands it. From the meticulously built circuit boards to the newly fabricated aluminum enclosure; we make guitar effect pedals like finely crafted musical instruments.
GBP ERP: £209 – Available Now – for more info, visit: https://www.audiodistributiongroup.com/brands/keeley-electronics/
The post Introducing Muse Driver Andy Timmons Full Range Overdrive From Keeley Electronics appeared first on Music Instrument News.