Advice on best way to add a Roland GP-100 to G System
Having just bought a used G system and finding it falls short in areas (inconsistent tuner working) I would like to add my Roland GP 100 to the system. at the moment I am using the 4CM to connect the G System with a Morley Wah Distortion Volume Pedal before the G System Input.
Guitar >>>> Morley
Morley >>>> G System
G System Insert Send >>>> Mesa V Twin Rackmount Input
Mesa V Twin Rackmount FX Loop Send (Mono) >>>> G System Insert Return
G System Output >>>> Mesa V Twin Rackmount FX Loop Return (Stereo)
Mesa V Twin Rackmount Output (Stereo) >>>> Mesa 20/20 Input (Stereo as to its output to 4 cabs, 2 left and right (10″ single spkrs)
Mesa V Twin Rackmount FX Loop is Parallel and has a dedicated pot to set wet/dry between 0 and 100%
I have the Mesa V Twin Rackmount FX Loop foot switched rather than use its auto clean or solo
The Morley is before the G System as an overall level control Device.
I have the FC200 Midi Foot Controller for my Roland GP 100 – I used its foot controller for overall volume level before getting the G System.
When I had the GP 100 in the system I went directly into the Mesa V Twin Rackmount. I used only its effects.
Guitar >>>> Mesa V Twin Rackmount
Mesa V Twin Rackmount FX Loop Send >>>> GP 100
GP 100 Channel A output >>>> Mesa V Twin Rackmount FX Loop Return (Stereo)
Mesa V Twin Rackmount FX Loop >>>> Mesa 20/20 Input (Stereo as to its output to 4 cabs, 2 left and right (10″ single spkrs)
Source: http://forum.tcelectronic.com
